Add: ZhangJiaDi Village, WangQingTuo Town, WuQing District, TianJin, China
General manager: Miss.Carry
1, choose a good charger: the battery to choose the original, good quality brand, will be more peace of mind, followed by the selection of a good charger. The word widely circulated in the industry is: the battery is not bad, is full of bad. So the choice of charger is very important, try to use the original charger.
2, can not long-term idle battery: long-term non-use of the battery, the battery should be fully charged first, and then 2-3 months to add electricity, so you can avoid battery curing, if long-term placement no matter, then the equivalent of scrapped.
3, do not frequent the use of fast charge: fast charge on the smart electric scooter battery damage is very large, it is easy to reduce the capacity, thereby reducing the battery life and reduce mileage.
4, is not allowed to overcharge: smart electric scooter battery charging time is generally red after the float and then float for two hours you can power off, but some people used to charge at night, the next morning in the unplug the power, do not know this Behavior will cause a serious battery burden, affecting the service life. Therefore, it is recommended that consumers charge during the day, so you can cut off the power after it is full.
5, no loss of electricity driving: smart electric scooter must not be able to drive at a loss, each time the electricity to the red light above must be promptly charged, even if the new car can not wait for the battery is completely depleted before charging, and if you are driving On the way there is a sudden lack of power status, you must also save the remaining power, use human foot, absolutely can not save the battery power consumption. Long-term loss of electricity will speed up the battery life.
6, choose high-quality battery: Choose the battery as far as possible to choose high-quality, good brand reputation batteries. Good brand smart electric scooter battery quality is excellent, service is better, sales, customer service, technical support, maintenance and other aspects of the construction is very perfect, can provide consumers with better after-sales service.
7, routine to check the battery: Check the battery shell of smart electric scooter, shell cover and sealant, there should be no rupture, check the battery installation, must be solid, wire and pole tower iron and other connections must be solid, if it is battery Smart electric scooter, need to scrub the exterior of the battery with hot water and dry it. Use cleaning cloth or cotton yarn to clean the surface of the battery dust, sludge, wipe the electrolyte on the battery cover, keep the battery and connecting wire clean, dry, check the pole, there should be no loose, clear the poles and wire joints on the oxide, No metal debris and other debris into the battery, check the start cable, if damaged must be replaced, and can not beat the battery, this is because the battery lead plate is extremely low, very fragile, not because of poor battery function and beat , Resulting in shell rupture, plate damage.