Add: ZhangJiaDi Village, WangQingTuo Town, WuQing District, TianJin, China
General manager: Miss.Carry
FOLDABLE WHEEL CHAIR DETAIL SPECIFICATIONS
Phosphate battery with UN-38.3 certification
Two rear wheel attached with minimum of 12 volts and minimum of 25 Ah
capacity or minimum of 24 volts minimum of 12Ah Capacity with easy to
remove battery pack on back
Recharge cycle 2000
Distance covered per full charge: more than 20kms
Standby time 15 days
2. MotorDC motor with minimum of 12 V, 250watts for each rear wheel
Climbing slope 8 degrees
Load capacity 125kgSpeed minimum 6km/h and maximum 8Km/h
3. JoystickFit in both sides
Intelligent 4 way controller – 360 degrees rotatable
Speed adjustable control setup atleast for every km
Battery charge status
Battery charge level indicator
Speed level indicator
Custom length adjustable
4. Front caster WheelShore A -90 specification
High level shock absorber rubber
Diameter 8 inchesThickness 2 inches
5. Rear Wheels
Rear Wheel dia -24”
2 inches thick quality tyres (shock absorbed)
Hand rim dia >0.75inch
High quality plastic or aluminium with appropriate grovees and powdered
coated in hand rims
Customized adjustable spacer with 0.5-0.75 inch width
Foldable Non-Detachable wheels
2 degree camber
1.The air pres¬sure is indicated on the side wall of the tire. For rear wheels, it should be at least 350 kPa.
2.Loosen the screws and move the footrest to the desired position. When you have adapted the height and angle of the footplate to your individual requirements, re-tighten the screws.
3.To change the position of the wheel lock, first loosen the wheel lock attachment screws and push the wheel lock forward.
Q: What's the MOQ?
Q: What's the departure port?
A: We are located in Tianjin city, usually Tianjin xingang port.
Q: What’s the payment term?
A: T/T, L/C, West union, PayPal.
Q: Can you OEM (usd my logo and color)?